Windows Cannot Access \\ Shared Drive - What to do?

How to Fix Network Problem Windows Cannot Access \\ Shared Drive

Windows Cannot Access \\ Shared Drive


"Windows Cannot Access \\ Shared Drive" There is a problem related primarily to the network of your local area connections and this error is usually caused by network permissions, the lack of improperly installed network drivers, and sometimes a corrupt Windows registry may also be the reason.

The worst thing that I really hate about this network error, not only on the folder that you can get this error message on a network file or on a network share drive. And believe it or not, but sometimes it becomes really hard to tell where the real mistake is, and to correct the problem, what we really need to do.
Network error
Windows cannot access \\ Computer Name
You do not have permission to access \\ Computer Name contact your network administrator to request access. 

If you have this problem on your local area network, I do not think that you really need to worry about it;

Because with the help of this tutorial, I'm definitely going to help you by showing you how to configure and configure your computer's permissions to read and write files or folders on your shared network drive through your Windows Network Place. can change.


Network Error "Windows Cannot Access \\ Shared Drive"


So, let's see how to troubleshoot this error;


This problem can occur on any version of Windows, even if you are using the latest Windows 10 or running Windows 7's old computer. Generally, there is an access denied network error due to some type of network permissions problem. But sometimes some other causes of this error appear on your computer screen and here are a list of the reasons that are happening on your computer:

  • Improper LAN Connection
  • Improper File or Folder Sharing Setting
  • Improper Drive or Folder Security Setting
  • Windows Registry got Corrupted
  • Network Driver got Corrupted


Steps 1:- Improper LAN Connection

If you recently made a LAN connection by yourself, or you may have tried to start file sharing, or have changed LAN wires or modems, or just made a change to your LAN configuration, then This is the time, where you will need to improve, all this.

Let's start with connections and Wires;

To create a connection between two different network devices such as Modems and Computers, we actually need to use a Straight Cable. On the other hand, PCs or PCs with similar network devices like PCs require Cross Cable to communicate properly.
What-are-the-Differences-Between-a-Standard-Ethernet-Cable-and-a-Crossover-Cable


The reason behind this explanation is that if you have recently changed the cable in your network, make sure that the cable you use is suitable for the proper connection.

Both cables look exactly the same but internal wiring is completely different and this is the reason that people usually get confused when making their PC a PC LAN connection.


Fix the the Problem of Windows Cannot Access \\ Shared Drive or Folder


Step 2:- Improper File or Folder Sharing Setting

Next configuration is 'Sharing Settings'. Check the appropriate IP configuration on each connected device in your network. If the IP address of all PCs is configured in it, make sure that this conflict will not be there. The conflict is primarily when two different PCs have the same IP configuration.


If you have pre-defined settings on "Obtain IP address" then you will also need to allocate IP addresses to all your share PCs.

To change or check your saved settings, you or the Network and Sharing Center can be saved, and then on the left sidebar, click on the "Change Adapter Settings" option. Now right-click on your network adapter and select "Properties". After that, select "Internet Protocol Version 4 (TCP / IPV4)" and then click on its "Properties" button.


Improper File or Folder Sharing Setting


Then go to 'Advanced sharing settings', make sure everything is configured as listed below:

Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings

  • Turn on network discovery.
  • Turn on file and printer sharing.
  • Allow windows to manage homegroup connection (recommended).
  • Turn on sharing so anyone with network access can read and write files in the public folders.
  • Use 128-bit encryption to help protect files sharing connections (recommended).
  • Turn off password protected sharing.

Note: Make these changes to your current selected network profile.

You also need to check that all your shared PCs are working on a single network workgroup. To check or change the workgroup, you can go to your 'Computer Properties' and click on the "Change Settings" button under "Computer Name, Domain and Workgroup Settings," and then click "Change ...".




Step 3:- Improper Drive or Folder Security Setting

80% of you are going to fix your problem by following this special solution because generally, people forget to change security settings when creating any shared files / files / folders in their network space.

So now I'm going to show you how to configure permission settings to easily connect to all the devices in your network to read and write files or folders.

If you are having this problem in all your network drives and folders and want to allow all those shared folders or drives at once, then it is not possible and you have to repeat all your shared steps Will also need to drive and a file and folder too.


If a single drive is a list of files / files that are to be shared, then allowing for that single drive can make all internal files / folders readable and writeable for other network computers.

1) Give the Permission to Everyone in File, Folder or Drives

To configure sharing permission, first of all, you have to right click on the drive, file or folder that you want to share and then select 'Properties'.

In the Properties window, select the "Sharing" tab and then click on the "Advanced Sharing ..." button. Now make sure you have ticked the "Share this folder" button.


After that, click the "Permissions" button and give full control to the "Everyone" user.


Give the Permission to Everyone in File, Folder or Drives

2) Add “Everyone” Username in Security Tab.

This step allows you to add a new user name in the Security tab of the properties of your file / folder / drive, just to make it accessible to all users who are connected to your LAN.

In order to provide access to all, we actually require a username called "Everyone" under the Security tab, so your OS can allow other connected PCs to cross security. But still, under the Security tab of your shared drive, file or folder there is no user name with the name 'everyone'.


So now again in the Properties window, click the Security tab and then select the "Edit" button, which will take you to another pop-up window, where you can add a username by clicking the second "Add ..." button.


Add “Everyone” Username in Security Tab

3) Allowing Permission to “Everyone”.

When you have done this with adding a username, this is the time when you need to get full permission for the username "Everyone" in the Security tab, just to make it accessible to any LAN connected computer.


Now, click on the username "all" and then tick the full control option and then click on "apply".



Step 4:- Windows Registry got Corrupted

The Windows Registry is a hierarchical configuration storage database that stores settings for Microsoft Windows operating systems and other installed software in your Windows.

Registry is a main goal when a virus or malware starts corrupting your windows and a single change value in your Windows registry. You can fix your Windows registry by using some of the best registry cleaners and it will fix some problems.

But before using that, I have some couple of manual registry settings which you can try to fix the issue;

First of all, open your Windows registry database by using the run command "regedit" You can press Windows + R to quickly show the run commander. Or you can simply search "regedit" on the Start menu.


Windows Registry got Corrupted

When it gets open, go to this location “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSLicensing\” into the database.

Expand the expand MSLicensing 'folder and then delete both the "HardwareID" and "Store" sub-folders listed under the extension. Ensure that you only delete the sub-folders and not the entire MSLicensing.


Windows Registry got Corrupted

This connection can fix the issue of licenses, if you have any connection.

After that Follow Next Step

"HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\systemlocation and then create a new DWORD.


create a new DWORD


Value named LocalAccountTokenFilterPolicy and then click Modify or double click on the key and type “1” under the ‘Value data’.



I Hop you'r  Problem of Windows Cannot Access \\ Shared Drive is Solved Thank You For Reading.


Read More

You Can’t  Access This Share Folder Because Your Organisation’s Security Policies Block Unauthenticated Guest Access.

Error Code: 0x80070035. The Network Path Was Not Found Solve

Windows 10 Hidden Tips and Tricks & Hack
Windows Cannot Access \\ Shared Drive - What to do? Windows Cannot Access \\ Shared Drive - What to do? Reviewed by The Windows Help on July 17, 2019 Rating: 5

No comments:

Powered by Blogger.